Test and Measurement

Here are Instruments like Power Supplies, Multimeters and Oscilloscopes. Logic Analyzers, Spectrum Analyzers and Data Loggers too. - Electrical Engineering Metrics

Search This Blog

Tuesday, June 11, 2019

HS33 Stick Meter DMM - Fieldpiece Instruments

Non-contact Voltage - Loud beeper and bright LED indicate the NCV tab is near AC voltages down to 24VAC.

True RMS (HS36) - Get the true voltage and amperage when testing variable speed fans or other non-sine wave applications.

HS33 Stick Meter DMM - Fieldpiece Instruments

 HS33 Stick Meter DMM - Fieldpiece Instruments

Auto-ranging (HS35,HS36), Automatically changes range for best resolution.

Temperature (HS33,HS35,HS36), Thermocouple plugs in directly for accurate readings, even in fast changing environments.

Microamps (HS35,HS36), For flame rectifier diode tests. Capacitance For motor-run and motor-start capacitors. Frequency (HS35,HS36) For variable frequency drives. Rugged rubberized case with magnetic hanger. Hi-voltage indicators you can't miss--both LED and beeper turn on to indicate you've touched a potentially dangerous voltage. Low ohms ranges for motor windings and mid range for thermistors.

Every HS30 series meter comes packaged inside the padded ANC1 4-pocket case. A 300AAC clamp head (ACH) is included. Just slide the clamp onto the top of the HS30 meter to read amps. Also included are deluxe silicone test leads, alligator clips, k-type thermocouple (HS33, HS35, HS36), battery (installed), operator's manual, and RFM66 fuse..

"Fieldpiece is the HVACR instrument manufacturer that technicians turn to for meters, air flow, manifold, leak detectors, combustion, scales, A/C analysis and more."

Fieldpiece Instruments, Inc.
1900 E Wright Circle Anaheim CA 92806, USA.

Thursday, June 6, 2019

4 1/2 Digit True RMS Bench Multimeter - B&K Precision

The 2831E takes typical multimeter measurements such as volts, ohms, and amps with great accuracy. It also has built-in math functions and USB connectivity,

4 1/2 Digit True RMS Bench Multimeter - B&K Precision

The limit operation lets you set and control the values that determine a HI / IN / LO status of subsequent measurements. The meter can be configured to emit an audible alarm when readings are outside of the configured limit.

2831  Digit True RMS Bench Multimeter

The meters can also be remotely controlled using application software (downloadable from the B&K website), which supports front panel emulation and data logging of measurement results.

Features Include -
  • Up to 50,000 count display resolution
  • 0.03% basic VDC accuracy
  • Built-in math functions: Rel, Max/Min, dBm, dB, %, Hold, Compare
  • Dual display to indicate two measurements simultaneously
  • CATI (1000 V)/CATII (300 V) protection 
  • USB and RS232 (5491B only) interface
  • AC + DC True RMS
  • Up to 25 readings per second measurement rate
From - B&K Precision

GDM-8261 - Dual Measurement Multimeter

A high precision 6 ½ digit Digital Multimeter with dual measurement displays, 11 measurement functions and 10 math functions at high accuracy.

A scanner card, which carries 16 V-Channels and 2 I-Channels, to facilitate the measurements of multiple-test points on either a device or multiple devices all at a press of a button.

The GDM-8261 can be used as a semi-auto ATE System to increase the throughput of manufacturing test or as a data logger to perform long term monitoring or characterization of a DUT.

GDM-8261A - Dual Measurement Multimeter
GDM-8261A - Dual Measurement Multimeter

Highlights

Dual Measurements to perform two selected measurements simultaneously. High Resolution: Up to 100pA with DCI and 1nA with ACI Measurements.
Features Include
  • 6 1/2 Digit Display1,200,000 counts
  • DCV Basic Accuracy0.0035%
  • Bright Vacuum Fluorescent Display (VFD)
  • Standard Interfaces USB, RS232C, Digital I/O
Good Will Instrument Co., Ltd was the first professional manufacturer in Taiwan specializing in electrical test & measurement instruments. They manufacture more than 300 product items, ranging from oscilloscopes, spectrum analyzers, signal sources, etc.