Test and Measurement

Here are Instruments like Power Supplies, Multimeters and Oscilloscopes. Logic Analyzers, Spectrum Analyzers and Data Loggers too. - Electrical Engineering Metrics

Search This Blog

Monday, July 1, 2019

LCR Meter SR715 and SR720 from SRS

The SR715 LCR Meter and SR720 LCR Meter measure passive components with as little as 0.05 % error. These easy-to-use instruments are quick to setup, adjust and calibrate.

LCR Meter SR715 and SR720 from SRS

The SR715 and SR720 are ideal for applications such as incoming inspection, quality control, automated test, and general benchtop use.

LCR Meter SR715 and SR720 from SRS

SR715 and SR720 have built-in features to aid in component sorting. This is especially useful for production testing, incoming inspection, device matching, or when you need to test multiple devices of similar value. The meters allow you to sort components into as many as ten different bins.

Features Include
  • 0.05 % basic accuracy (SR720), 0.2 % (SR715)
  • 5-digit display of L, C, R and Q or D
  • Test frequencies to 100 kHz (SR720)
  • Up to 20 measurements per second
  • Binning and limits for parts sorting
  • External capacitor bias up to 40 V
  • RS-232, GPIB and Parts handler interfaces
Stanford Research Systems, Inc

Scientific Instruments, Vacuum & Analytical Instruments, Time & Frequency Instruments. Test & Measurement for Research and Analysis.

Programmable Impedance LCR Meter 3525 - Tegam

Low-cost, high-accuracy impedance parameter testing. The instrument measures L, C, R, RP, RS, |Z|, D, Q, Phase, V & I starting at a basic accuracy of 0.08%. It is designed for manual or remote operation and is very simple to use.

Programmable Impedance LCR Meter 3525 - Tegam

Programmable Impedance LCR Meter 3525 - Tegam

Features Include
  • Basic Accuracy: 0.08%
  • Measurement Speed: 15 mS
  • Test Frequencies: 120 Hz, 1 kHz
  • Extremely Compact Size (8"w x 4"h x 7"d)
  • Built-in comparator with audible signal
  • Highly visible dual displays
  • Standard RS-232 and I/O Interfaces
Tegam - Calibration - Test and Measurement

TEGAM, Inc. is a privately held company specializing in the manufacture and support of a wide variety of test, measurement, and calibration instruments. The company was founded in 1979 by Terry Gambill.

TEGAM Inc.
10 Tegam Way Geneva, Ohio 44041, USA.

PS300 Series - High Voltage Power Supply - SRS

Industry standard HV Precision Lab power supplies with up to 20 kV output capability. GPIB and RS-232 computer interfaces are standard on all 10 W supplies.

All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

PS300 Series - High Voltage Power Supply - SRS

PS300 Series -  High Voltage Power Supply - SRS

The PS310, PS325 and PS350 are dual-polarity, 25 W supplies, while the PS355, PS365, PS370 and PS375 are single-polarity, 10 W supplies. All of the instruments are arc and short-circuit protected with separate programmable hard and soft current limits, making it possible to use them as constant current sources.

Specs Include
  • 1 volt resolution
  • 0.001 % regulation
  • 0.05 % accuracy
  • Programmable limits and trips
  • 0.0015 % ripple
Stanford Research Systems, Inc.
1290-D Reamwood Avenue, Sunnyvale, CA 9408, USA.

Extra Extra !